-40%

Wire Rope Clamp, Wire Rope Cable Clip 3/16" inch (5 MM) Zinc Plated 100 Pcs.

$ 19.53

Availability: 100 in stock
  • Brand: Unbranded
  • Model: 1370267, TH15006
  • Return shipping will be paid by: Buyer
  • Condition: New
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money Back
  • Item must be returned within: 14 Days
  • Restocking Fee: No
  • Country/Region of Manufacture: China
  • MPN: 1370267, TH15006

    Description

    Wire Rope Clamp, Wire Rope Cable Clip 3/16" inch (5 MM) Zinc Plated 100 Pcs.
    ***************************************  FREE SHIPPING!!  ****************************************
    New, set of ONE
    HUNDRED
    (100 Pcs).
    Steel U-bolt and nuts
    Malleable iron saddle
    Designed for forming an eye or loop on wire rope
    Base of saddle is grooved to form wire rope for a stronger grip
    See pictures of the correct way to install.  The manufacturer recommends 3 clamps per rope end.
    Proper Usage of Wire Rope Clips
    Clips are usually spaced about six wire rope diameters apart to give adequate holding power. They should be tightened before the rope is placed under tension. After the load is placed on the rope, tighten the clips again to take care of any lessening in rope diameter caused by tension of the load. A wire rope thimble should be used in the eye of the loop to prevent kinking.
    The correct number of clips for safe operation and the spacing distances are shown in the table provided.
    TECHNICAL SPECS
    Item
    Wire Rope Clip
    Clip Type
    U-Bolt
    Material
    Maleable Iron
    Wire Rope Dia.
    3/16"
    Min. Number of Clips
    3
    Rope Turn Back
    3-3/4"
    Min. Torque
    7-1/2 ft.-lb.
    Finish
    Galvanized
    1370267, TH15006, 2VKJ1