Shopcorp 40A 4 Pole 2NO2NC 120V Contactor w/ 35x152.4mm DIN Rail and 2#10 Screws

Description

Shopcorp 40 Amp 4 Pole 2NO 2NC IEC 400V Contactor (Silent Operation) – 110/120VAC Coil, Inductive 40A and Resistive 60A | Includes 35 x 152.40 mm Steel Zinc DIN Rail and 2 #10 Phillips Screws
• INDUSTRIAL QUALITY COMPONENTS – 40 Amp General Purpose Contactor for home and industrial uses, with power status indicator and 2 Normally Open (NO) and 2 Normally Closed (NC) poles for transfer switch applications. Complies with IEC/EN standards for consistent and reliable installation. Includes DIN Rail made of resistant steel zinc (35 x 152.40 mm / 1.38 x 6 in) and two (2) 18-8 stainless steel #10 Phillips drive, truss head screws
• APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters; and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil
• DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 35 mm (1.38 in) length 152.40 mm (6 in) and thickness 5 mm (0.2 in)
Contactor Specifications
Contactor IEC 400V
Contactor Type 2NO 2NC
Full Load Amps-Inductive 40
Full Load Amps-Resistive 63
DC Load: 30A, @ 24VDC
Power status indicator
Number of Poles 4
Coil Volts: 110/120VAC, 50/60 Hz
Coil Load: Inrush 52VA, Sealed 10VA
IEC AC Rate: AC-1, 10 kW. AC-3, 8 kW
Electric e strength: 4 kV
Operating Temperature: -30…+70 °C (-22…+158 °F)
1 HP @ 1 Phase - 120V
2 HP @ 1 Phase - 230V
5 HP @ 3 Phase - 208V
5 HP @ 3 Phase - 230V
10HP @ 3 Phase - 480V
Weight: 0.88 lb (0.42 kg)
CE approved 61095, UL pending
Base or DIN 35mm mount
Wiring:
Solid Conductor: 25 mm2 Max torque 0.6 Nm
Stranding Conductor: 16 mm2, Max torque 0.6 Nm
Compliance:
EN 60947-4-1, EN 60947-5-1, IEC 947-2, IEC 60947-4-1, IEC 60947-5-1, VDE 0660
DIN Rail Specifications
Material: Steel Zinc
Width: 35 millimeters (1 3/8 inches)
Length: 152.40 millimeters (6 inches)
Thickness: 5 millimeters (0.2 inches)
Slots: 6
Standards: EN/IEC and RoHS