MAD-RAMPS ATV/UTV Ramp Kit - MR1400

Description

MAD-RAMPS ATV/UTV Ramp Kit - MR1400
Part #: 5100751
Manufacturer Part #: MR1400
Overview of MAD-RAMPS ATV/UTV Ramp Kit - MR1400
The MAD-RAMPS Pivoting Ramp System allows you to safely load, unload, and transport your ATV or UTV.  The MAD-RAMPS Pivoting Ramp System is both a simple solution and a superior alternative to towing a trailer and using conventional loading ramps.  Engineered for strength and durability, the MAD-RAMPS Pivoting Ramp System is made in the U.S.A. and completely maintenance free. Our patent-pending design seamlessly connects to your truck’s receiver hitch in seconds, and it enables you to quickly load your machine and be on your way to your destination in a matter of minutes. Providing more than 16 square feet of ramp loading surface when fully extended, the MAD-RAMPS Pivoting Ramp System makes loading, unloading, and transporting your ATV or UTV completely hassle free. Loads, unloads, and transports ATVs/UTVs up to 1400 pounds DOT approved in all 50 states LED tail lights, brake lights, turn signals, and a rear marker light for greater visibility and safety Adjustable ground-clearance settings for highway and off-road travel Includes manufacturer’s one-year limited warranty When not in use, the MAD-RAMPS Pivoting Ramp System stores conveniently on the wall-hanging MAD-MOUNT Dennis Kirk Part No. 5100752 (sold separately) Frequently asked questions: Will MAD-RAMPS work for my ATV/UTV/Snowmobile and my truck? In most cases, the answer is Yes. However, we strongly recommend that you take the dimensional measurements of your machine and your truck bed to determine whether your truck bed is large enough to accommodate your ATV or UTV. Most ATVs and small- to mid-size UTVs will fit into the bed of a full-size truck. Our standard-length ramps can accommodate machines with a maximum wheelbase length of 84 inches. With the addition of the MAD-RAMPS Extensions Dennis Kirk Part No. 5100755 (sold separately), the MAD-RAMPS system can accommodate machines with a maximum wheelbase length of 114 inches. MAD-RAMPS will work with any make or model of snowmobile. Do MAD-RAMPS require a truck with a receiver hitch? Yes. Additionally, depending on ATV/UTV weight, a minimum of a Class III or a Class IV receiver hitch is required for the MAD-RAMPS Pivoting Ramp System. It is imperative that you check your owner’s manual to determine the tongue-weight rating for your truck’s specific receiver hitch. Once you know your truck’s specific tongue-weight rating, you will need to perform one quick calculation: Add together the total weight of the MAD-RAMPS Pivoting Ramp System (151 lbs) and two-thirds of the weight of your ATV or UTV (2/3 = machine weight x 0.67). After you have completed this calculation, you must make sure that the combined weight of the MAD-RAMPS Pivoting Ramp System and two-thirds of the weight of your ATV/UTV is less than the maximum tongue-weight rating for your truck’s receiver hitch. If this combined weight is more than the maximum tongue-weight rating for your truck’s receiver hitch, the MAD-RAMPS Pivoting Ramp System should NOT be used on your truck. Furthermore, it is imperative that you closely inspect your truck’s receiver hitch to determine whether it is in good working condition. You need to ensure that the structural integrity of your truck’s receiver hitch has not been degraded from years of use or misuse, or from the use of highway salts and other degrading compounds that your truck may have encountered.
Specs
Type
Ramp
Units
Kit
Weight
92.35 lbs
Purchase with confidence:
You may return any unused and unaltered item(s)
within 90 days for an exchange or a refund.
Ebay orders placed by 3pm (central) M-F are shipped the same day!