-40%
AC 110V Linear Actuator Reciprocating Electric Motor + PWM Speed Controller
$ 82.89
- Description
- Size Guide
Description
Product Infotmation:-Rated Voltage: 110V AC /220V AC
-No-Load Speed: 7.5-450RPM(Optional)
-Stroke ability: 30~100mm Stroke can be adjusted by your requirements.
-Widely use for Shale shaker, Vibrating screen, Incense machine Squirt
machine, Spraying Machine, Pellet machine, Particle-making Experiment,Lifespan lab testing,Sex Machine and so on.
-------------------------------------------------------------------------------------------------------------------------------------------------
1. Package: 1PCS* AC Motor Linear Actuator (Gift 1PCS* AC Speed Controller + 1PCS* plug),
2.Sweet Tips: The longer the stroke, the smaller the torque; the speed faster, the noise louder; if you use the speed controller to reducer the speed, the torque will be smaller; before you order, you need to confirm the torque, overload will burn down the motor!
3.The linear actuator material: aluminum alloy, long life; it's an automatic constantly reciprocating linear actuator, which frequency is variable; it's output in an axle, the run speed is Non-uniform; axle need adds lubricating oil at regular intervals, in order to limited axle temperature less than 90 degrees, and oil wetness; Due to rotating lump is affected by gravity, the machine go and back speed is different;
Characteristic(please must read following sentences before purchase):
<1>This Linkage Mechanism is an automatic constantly reciprocating linear actuator motor, which frequency is Variable;
<2>This machine output in an axle, the run speed on axis is Non-uniform;
<3>The speed faster, the noise louder. If require quietly, please be careful before bid;
<4>Linear motion part is consist of sliding linear ball bearing and steel axle. Axle need adds lubricating oil at regular intervals, in order to limited axle temperature less than 90 degrees, and oil wetness;
<5>Due to rotating lump is affected by gravity, the machine go and back speed is different.
Sweet tips:
Speed higher than 300rpm has very small force, the load larger then
maximum force will break gearbox. Clear all barriers before operating the motor, even use your hand holding the shaft may break the motor.
Please do accord to our advices for avoid unnecessary trouble.